Bubbler Fountain Outdoor Explained

Bubbler Fountain Outdoor Explained

Bubbler Fountain Outdoor Explained

Updated on 12/3/2023
Emma DowneyBy Emma Downey
Gardening Expert
Learn More about Emma Downey

Creating a bubbler fountain outdoor in your garden by adorning it with the calming sights and sounds of water in motion may be very straightforward if you do it this way.

Landscape Feature

Bubbler Fountain Outdoor

Bubbler Fountain Outdoor

Very few sounds in the world have the same sedative effect as the sound of running water. Even if you don't have a winding stream in your backyard, you can still reap the advantages of water's presence in your yard by putting in a garden fountain. That will give you the same effect. That is another approach that you may take. In addition to having the same calming benefits, it can significantly enhance your area's overall aesthetic. The design of a fountain's structure influences the way water moves through it and the sound it makes. 

That can range from a splashing sound that muffles outside noise to a bubbling sound that serves as a subdued background soundtrack for discussion on a patio. The design of a fountain may speak to more than aesthetics; styles can range from traditional tiered towers to modern orbs, for example. There are many styles, ranging from modern spheres to traditional tiered buildings.

On the other hand, the visual attraction of the feature is primarily due to the water's flow and how it interacts with the light. Water gradually falling off a brilliantly colored round urn is more enjoyable to see than a forceful torrent rushing from one basin into another. You select a fountain based on its aesthetics, but being aware of the many options available for its construction materials may help you find one more quickly. Ceramics with glazes come in various vivid colors; lightweight fiberglass can be shaped into intricate designs; cast concrete imitates the look of natural stone. In any case, you ought to go to the garden center to personally inspect the plants. You have completed all that is to read on this subject right here on this page.

You will find this imposing tiered fountain on a patio surrounded by pavers and boxwood hedges. It encourages guests to have a seat and remain for a while in the establishment.

Anatomy Of A Fountain

Anatomy of a Fountain

Anatomy of a Fountain

This conventional tiered fountain features a pump hidden in the basin that recirculates the water and feeds it up through the tubing to the top, where it continually fills and overflows each tier. This fountain is a tiered version of a typical water feature. The pump is hidden beneath the basin where it is located.

The Most Important Things

What Is The Price Tag Attached To It?

A kit that comprises a fiberglass fountain with two tiers that are 3.5 feet tall and a pump may be purchased for roughly $150, but you can buy a cast-concrete version of the same height for approximately $500. The shipping cost is not included in the price of an attractive seven-footer built of cast concrete, which can easily reach up to around two thousand dollars.

What Is The Regular Cost Of Maintenance?

For the duration of the season, it is imperative that the pump not be allowed to become overheated by ensuring that the fountain is kept flush with water and free of any obstructions. It would be best if you drained the basins before the arrival of winter to prevent water from freezing within and causing damage to the structure.

Product to be added

Please Create Snippet For B09JCHMYCG

Pro Or DIY?

You may construct your fountain by combining a pump with pebbles or an urn. Alternatively, you can buy a kit and put it together independently, provided the spray is not too heavy. If you have cast-concrete kits that weigh more than 150 pounds combined, you should look into hiring a professional to install them.


If you are entertaining small children, you should select a type of fountain that does not have a pond but instead collects water from below the surface, and this will eliminate the risk of the youngsters drowning.

Five Different Perspectives On The Water Falling

The path that the water takes down the fountain helps set the tone for the entire structure, not to mention the amount of volume it generates and the number of times it will need to be replenished. Here are five distinct options for your consideration, should you want to look into them.

Is it possible that the fountain is too loud? You may try stuffing river rocks into the basin, and they will reduce the force of the falling water while also reducing the distance it travels.

1. Running


A sheet of water glides down the surface of an object and a reservoir, a layer of decorative stone. A pump within the pool is utilized to transfer the water (a pondless fountain). If the surface is smooth, the sound of the water will be comparable to the sound of a flowing garden hose, but if the surface is textured, the sound of the water will be more like the sound of water trickling. The water clinging to the fountain's edge is not easily lost to splashing. Still, on hot days, that thin coating of water evaporates quickly, so it may be necessary to refill the fountain more frequently than usual. Splashing does not promptly lose the water clinging to the fountain's edge.

2. Bubbling

2. Bubbling

2. Bubbling

A bubbler submerged in a basin creates a soft churning motion on the water's surface. That results in an experience primarily visual in character and functions as an efficient magnet for avian and insect species. Because the water does not cascade down the side of the fountain, bubblers are likely the type of fountain that makes the least amount of noise. They endure an incredibly negligible amount of water loss due to splashing or wind, which decreases the frequency with which you will need to replace them.

3. Raining



The mesmerizing pattern of a rain shower is produced when hundreds of raindrops are pushed to fit through cracks in the ground and then fall like a beaded curtain into a pool of water or a basin filled with pebbles. That creates a cacophony that mimics the sound of a rain shower. There is a direct correlation between the storm's intensity, the height building, and the depth of the pool. It would be best if you made preparations to refill the reservoir regularly since a significant amount of water evaporates and is carried away by the wind after escaping the pool.

4. Pouring



The loud sound created by concentrated streams of water pouring from one level to the next into open pools is quite comparable to the sound made by a pot filler. Others find this sound to be peaceful, while others find it to be quite unpleasant. Because moving the water from one basin to another makes it more sensitive to gusts of wind, it can be rather challenging to maintain the water level at the correct height.

5. Cascading



The water that spills over from the uppermost pool onto the subsequent levels generates a rhythmic splashing that masks any distracting background noise. In addition, in comparison to the other types of fountains, except the rain fountain, this type of fountain has to have its water supply refilled more frequently. It is possible to minimize the amount of water that splashes out of the fountain and the volume of the fountain itself; however, this was not the function you designed the design to serve.

Where To Put Your Fountain?

There is a fountain that is appropriate for every kind of garden, but selecting the right site for it demands striking a balance between the proportions and curves of the fountain and the design of your outdoor area. There are many different types of fountains available.

The Accent

You can entice pollinators to a floral area by placing a bubbling urn in a discreet location at one of the corners of the space. Grow it a little higher than the plants near it to make it visible from various vantage points in the yard. That will allow you to see it from other parts of the yard. Additionally, you should keep it away from any loud mechanical noise, such as air conditioners, as this might cause its soothing sounds to be drowned out. You can avoid this by keeping it in a location that is distant from these noises.

The Centerpiece

A fountain in the backyard is around 6 feet tall, and it can be seen from a window that overlooks the backyard. A traditional tiered version should be positioned along pathways that link with one another in a more formal design that divides the lawn into quadrants. If you want to avoid screaming over your glass of rose, keep a feature of this size at least 8 feet away from any area used for entertaining.

The Accomplished Aim

Installing a fountain as the focal point of a gathering place hidden away in a more inaccessible portion of the yard might be beneficial. You may foster a sense of discovery in your guests by constructing your venue so it can be seen or heard from a distance and developing a path that weaves its way to the goal. When you have finished the setting by putting some benches and containers with plants, you will have created a peaceful little enclave for yourself.

Preparatory Actions

Before you bring your new fountain inside from the garden shop, you must clear up the area where you plan to install it and ensure it is ready for its new home.

Bubbler Fountain Outdoor Explained

Bubbler Fountain Outdoor Explained

1. Dig a footing. Water won't flow correctly from a fountain that isn't level, and you can't expect it to remain that way if you lay it down on a patch of turf. You'll need to dig a footing if you want the water to flow right. In its place, you will need to excavate a foundation for the fountain. Consider the space beneath the fountain's pedestal a little patio, and fill it with alternating layers of stone dust and crushed stone measuring three-quarters of an inch in size. If the footprint of the pedestal is not too large, you can finish it off with a flat stone or paver on top.

2. If you want to install new wiring, you will need the assistance of a licensed electrician who can run a separate 110-volt line to a GFCI outlet. To determine the precise location of the outlet, subtract about 4 feet from the total length of the pump cable, which will ensure that there is adequate slack for the installation of the pump.

3. Take into consideration the water. The size of the fountain and how water flows over it, temperature, and relative humidity all influence how often the water will need to be replaced. A chore that only has to be completed is easier to deal with when one is provided with the convenience of having speedy access to a fixture.

Most people use a hose to refill the basin whenever it becomes depleted. Installing an autofill valve is another solution; this valve links to an irrigation line already in place and enables the automatic replenishment of water supplies.

Screen Out Noise

By putting the fountain between your primary eating area and the annoying noise source, you may make the droning hum of an air conditioner that belongs to a neighbor or the rumble of street traffic seem less obvious. It is recommended to position quieter fountains, such as these urns, approximately 6 feet away from areas where tourists congregate.

Got some stones? Make A Fountain!

Got some stones? Make a fountain!

Got some stones? Make a fountain!

You may create your water feature by connecting a pump to a pile of pebbles, an old planter, or any other object that could be regarded as a beautiful addition to the yard. Here is the protocol that must be adhered to:

For a do-it-yourself project, putting a bubbler in a bird bath and calling it a day is not the most practical option; instead, installing a pondless fountain is the most suitable solution. The term "pondless" refers to a system in which there is neither a visible pool nor a basin; instead, the water collects in a reservoir below ground, and then a pump transports it to the top of whatever it is that you want the water to trickle down. 

Dry cascading is another name for this particular sort of technology. With this approach, you can construct a fountain out of virtually anything as long as it has a hole drilled into it so the water line can run through it. One of the many advantages of adopting this technique (we used a masonry bit on the creek stones pictured here). Pondless results in less work to maintain the property because there is no place for leaves to collect in the reservoir.

How To Build A Pondless Fountain

Bubbler Fountain Outdoor Explained

Bubbler Fountain Outdoor Explained

The project requires that you dig a hole for the reservoir, install the pump, and cover everything else. These are steps that need doing for the project and the exact steps that need to be followed for the type of fountain you choose to build. The difficulty is selecting what size pump to buy, which calls for one to carry out a substantial amount of quantitative work. We decided to follow the path of least resistance. We posed this question to Rolf Nelson, the proprietor of Nelson Water Gardens and Nursery, the business primarily credited with popularising pondless porcelain fountains. If you use a reservoir at least one-foot square and one foot deep, the fountain's height should be the first thing you think about while designing it. You will need a gallon-per-hour pump, as that is the unit used to measure how much water can be moved in one hour (gph).

He recommends that you:

  • For a fountain that is 1 foot tall, the range is 120–200 gallons per hour.
  • For a two-footer, the range is 250–350 gallons per minute.
  • 350–700 gph is the appropriate range for a male who is 1 meter tall.
  • The speed limit of 900 kilometers per hour for anything taller than 1.5 meters (5 feet).

Here you will find detailed instructions broken down into individual steps for building a fountain.

Put On Some Lights

Product to be added

Please Create Snippet For B09X1S2GX1

When you install an LED fixture, you can highlight the water with a bright white light as it rushes from the top of your fountain. That will give your fountain a more dramatic effect. The enhancement of your fountain is one way to reach this goal. As the water flows, fitting in the shape of a doughnut, the water is lighted by eight water-resistant LEDs encircled around the circumference of the fitting. This fitting may be attached to the end of the water tube by sliding it on. The line is used to thread one end of a low-voltage power cable through, and the other end of the chord is connected to a GFCI outlet. Because they have built-in photocells, the lights will turn on themselves when it gets dark and turn off when it gets light. About $35 apiece; Atlantic Water Gardens

Keep Ahead Of Common Maintenance Problems: Waterloss

Evaporation causes smaller fountains to lose water faster than more giant fountains since the smaller fountains have a lower surface area. After eight hours of use, you should check the water level, but you should do it sooner if your fountain splashes or is located in an area with a lot of wind.

Keep Ahead Of Common Maintenance Problems: Mosquitoes

Bubbler Fountain Outdoor Explained

Bubbler Fountain Outdoor Explained

When the pump is switched on, the moving water discourages mosquitoes from settling on the water's surface, which helps control the population of mosquitoes. To get rid of the annoying insects, turn off the fountain, and then put a few drops of mosquito repellent into the water that is safe to use around animals.

Keep Ahead Of Common Maintenance Problems: Algae

Applying an algaecide designed for usage in ponds should be done to eliminate the green slime. Since the additive does not evaporate, you should only add more of it when you are replenishing the water that you lost due to splashing. If you add more of it at any other time, the mixture will become too concentrated.

Keep Ahead Of Common Maintenance Problems: Leaves

Bubbler Fountain Outdoor Explained

Bubbler Fountain Outdoor Explained

Remove them before they have the opportunity to descend to the bottom of the fountain and become stuck by the pump, which might result in the pump breaking down. When planning the fountain's location, it is essential to consider how near it will be to any deciduous trees in the area.

Keep Ahead Of Common Maintenance Problems: Freezing

Ensure that the basins have been drained and vacuumed before the first frost, and then bring the pump inside. First, you should use a tarp to cover the building. Next, you should drape towels over the basin's rim with the lowest water level in it so that you may absorb any condensation.

The Finishing Touch For A Beautiful Garden

The fountains that have the most appealing aesthetics are the ones that successfully convey the character of the surrounding landscape. Simply clicking on the link will give you information on four distinct ways that you may incorporate them into a diverse variety of garden settings.

Product to be added

Please Create Snippet For B08X7H3NLG

A Touch Of The Natural World

This flowing urn is the perfect size to accommodate the salvia and hosta that are located nearby, and it is concealed from view by a fence of greenery that has been planted to create an appealing enclave. The plume is a significant part of the overall visual presentation, and it is possible to modify its height at the pump to make it less obvious to bystanders.

Formal Focus

Because it is situated among topiary shrubs and shorn hedges, this traditional two-tiered fountain with an aged finish highlights the classical ambiance of the garden. Hedgerows surrounding the basin create a barrier between the children and the water, ensuring their safety.

Romantic Retreat

The cast concrete, done in earth tones, blends in with the flagstone surrounding it, enabling the garden's more vibrant colors to take center stage. This sculptural pedestal creates a striking vertical element that attracts attention with water spouting in the form of a fan pattern.

Bubbler Fountain Outdoor Explained

Bubbler Fountain Outdoor Explained

Asian Oasis

The landscape's appearance has evolved, conveyed by bubbler fountain outdoor advanced age, which is set amidst Japanese maple, evergreens, hostas, and ferns. Thanks to this detail, it appears the garden was there before the fountain.